ASSEMBLING KERFUFFLE – INCLUDED IN YOUR KIT
KERFUFFLE BILL OF MATERIAL
Preparation
TOOLS NEEDED
- Soldering Iron
- Phillips Screwdriver
- 2mm Hex key
- 5/64″ hex key
- Fine tip needle nose pliers (we like iFixit)
Two Types of Kerfuffle Kit
PARTS NEEDED
TIP: DESTRUCTIVENESS AND SAFETY
These kits are lifters and as such are generally safe– they can be run without an arena or a test box. Use caution is to avoid getting your fingers pinched in the Lifter module, and see the safety page for battery safety.
BEFORE YOU BEGIN
To make your Kerfuffle run, you’ll need a transmitter and a charger for your lipo battery. If you have one from another bot, you won’t need another charger and transmitter, but you will need to bind your receiver to your transmitter.
Required for your bot, Not Included:
Get Ready to Build:
- Charge the included LiPo battery using a LiPo-compatible charger.
- Install batteries in your transmitter. The T6 transmitter requires 8 AA batteries.
Assembly Steps – Check your parts:
- Take a few moments and make certain that you have all of the parts that should be included in your Kerfuffle Kit below. Quickly inventorying the parts included in your Kerfuffle Combat Robot Kit can save trouble Later. Nothing is more frustrating than realizing you’re missing a part when you are in the middle of your build. Familiarizing yourself with the materials will also help you assemble the robot correctly.
Included in Your Kit:
© 2026 ItGresa Consulting Group, Inc. d/b/a ItGresa Robotics. All original text, graphics, layout, tables, illustrations, and educational content are copyrighted. Product names, trademarks, and manufacturer technical information remain the property of their respective owners and are used for identification and educational purposes.
Technical information in this guide is adapted from manufacturer documentation published by FingerTech Robotics Ltd.