Aria 35A BLHeli Brushless Speed Controller
$27.99
- The Aria 35A BLHeli_32bit ESC is a brushless electronic speed controller suitable for weapon control .
- Power wires can be trimmed and tinned to fit into FingerTech Mini Terminal Blocks.
NOTE: This speed controller is forward only, and can be used to control weapons but NOT brushless drive motors.
$27.99
26 in stock (can be backordered)
Specifications
The Aria 35A BLHeli Brushless ESC is an Electronic Speed Controller for brushless weapon motors. A very detailed video on ESCs and how they work can be seen on Youtube here: https://youtu.be/OZNxbxL7cdc
Our Aria 35A BLHeli Brushless ESC can serve in a variety of areas, but it should generally be viewed as a replacement part or a standalone weapons controller.
| Type | Brushless |
|---|---|
| Firmware | BLHeli_32 |
| Support DSHOT | 150/300/600/1200 |
| Continuous | 35A |
| Max | 40A peak 10s |
| Size | 32mm x 16mm x 5mm |
| Input Voltage | 3S-6S Lipo |
| Weight | 4.37g |
| Weight | 0.15oz |
| Weight with bullet connectors | 7.77g |
| Weight with bullet connectors | .25oz |
| Current Limit | Yes |
| Current Sensor | Yes |
| Status LED | Yes |
| BEC | No |
| Adaptive Timing | Yes |
| Firmware upgradable | Yes, via signal wire |
A great wiring diagram, thanks to Georgia Tech’s RoboJackets Wiki can be found here: Diagram
Note that the Aria 35A BLHeli Brushless ESC would be used in this instance as the orange element in the wiring diagram: as a controller to a brushless weapons motor. All controllers are driven from the same battery, as you can see from the diagram. This model doesn’t have a BEC (Battery Eliminator Circuit), which allows all elements to be run from a single battery. Power to the receiver can be supplied by the motor ESCs or by a separate dedicated BEC circuit.
