FingerTech FT1806 2300KV Brushless Motor
The FingerTech FT1806 Brushless Motor:
The Megaspark motors, like the majority of drive motors used in Combat Robotics, are a combination of a brushed or brushless motor, and a rugged gearbox. Fingertech is now offering the motor and the gearbox separately, so that you can keep the same gearbox power with different motive power, or you can replace either the gearbox or the motor.
We’re happy to give the builders more options and flexibility, and the Megaspark gearbox/motor is another example!
Available on backorder
|Rated Voltage:||20V (happy on 2-4S lipoly)|
|Rated Current:||10A. Max Current measured @ 11.92V: 10.3A|
|Suggested ESC:||BL20A-R Reversing Brushless ESC|
|Motor Diameter:||23.1mm (0.91in) (slightly smaller than a 24mm gearbox, so it won’t rub on a sidewall if flush mounted)|
|Motor Length (back to face):||18.5mm (0.73in)|
|Motor Wires:||10cm long 26AWG with 3.5mm bullet connectors|
|Shaft Diameter:||2mm (0.078in)|
|Shaft Length:||9.6mm (0.38in)|
FT1806 Mounting Holes:
- Two M2-0.40 holes spaced 16mm (0.63in), two M2-0.40 spaced 12mm (0.47in), 90degrees offset.
- The rotating portion of the motor has four M2-0.40 screw holes spaced evenly on a 9mm circle.
- Connect the three ESC wires any way you like. If the motor is spinning backward, you can reverse the direction of any brushless motor by swapping any two wires.