FingerTech NightWing 3lb Undercutter Frame Kit
FingerTech NightWing Frame Kit
The FingerTech NightWing frame kit gives you every structural panel you need to build or rebuild your 3lb Nightwing combat robot chassis — CNC-machined from premium materials with every pilot hole pre-drilled. FingerTech engineered the NightWing as a purpose-built 3lb undercutter, and these frame parts reflect that precision. No cutting, no finishing, no guesswork — just bolt it together and fight.
$94.99
2 in stock (can be backordered)
Built to Fight, Ready to Build
The FingerTech NightWing frame kit contains every structural panel needed to assemble the NightWing 3lb undercutter — one of the most refined 3lb combat robot chassis designs available today. Whether you’re building your first NightWing or replacing battle-damaged parts, every piece arrives CNC-machined to spec with pilot holes pre-drilled. No cutting, no drilling, no finishing required.
What’s Included
The frame kit includes all structural panels for a complete NightWing build:
- 1× Top — 1/8in Clear PETG
- 1× Bottom — 1/8in Blue G10 Garolite
- 2× Fronts — 3/8in Black UHMW
- 1× Back — 3/8in Black UHMW
- 2× Side Motor Mounts — 3/8in Black UHMW
- 2× Inner Short Wall — 1/4in Black PLA+
- 2× Inner Long Wall — 1/4in Black PLA+
Materials Built for Combat
FingerTech selected each material with the NightWing’s role as an undercutter in mind. The Blue G10 Garolite bottom plate is a glass-epoxy laminate known for its toughness and resistance to impact — a smart choice for the panel that takes the most punishment in an undercutter configuration. UHMW polyethylene handles the front, back, and side motor mount panels, offering excellent abrasion resistance and the ability to absorb hits without shattering. The clear PETG top keeps weight down while allowing easy visual inspection of the internals.
What You’ll Need
The frame kit contains all structural panels but does not include fasteners. Pick up the FingerTech NightWing Screw Pack for the exact screws, nuts, and hardware needed to complete the assembly. For a full NightWing build, the complete electronics, drivetrain, and weapon components are available individually on the ItGresa site.
A Spare Set Worth Having
Combat takes a toll. The NightWing frame is designed to be repaired and rebuilt — not thrown away after a bad event. Keeping a spare frame kit on the shelf means you’re back on the table faster after a hard fight. The UHMW and G10 panels are the most likely to take damage in an undercutter configuration, and having replacements ready is simply good pit strategy.
Features
- Complete FingerTech NightWing frame kit — every structural panel included
- CNC-machined with every pilot hole pre-drilled — no cutting or finishing required
- G10 Garolite bottom plate for impact resistance where it counts most
- UHMW polyethylene front, back, and motor mount panels for abrasion resistance
- Clear PETG top keeps weight low with easy visual access to internals
- Purpose-built for the NightWing 3lb combat robot chassis
- Repair or replace battle-damaged panels without rebuilding from scratch
Specifications
Assembled frame dimensions reflect the complete NightWing 3lb undercutter chassis. Individual panel dimensions vary by component.
| Specification | Value |
|---|---|
| Length (Depth) | 5.00in (12.7cm) |
| Width | 11.80in (30.0cm) |
| Height | 2.00in (5.0cm) |
| Weight (Frame Kit) | 14.85oz (421.0g) |
| Top Panel | 1/8in Clear PETG |
| Bottom Panel | 1/8in Blue G10 Garolite |
| Front / Back Panels | 3/8in Black UHMW |
| Side Motor Mounts | 3/8in Black UHMW |
| Inner Walls | 1/4in Black PLA+ |
Frequently Asked Questions
Does this kit include fasteners?
No — the frame kit includes all structural panels but no screws or hardware. Pick up the FingerTech NightWing Screw Pack for the exact fasteners needed to assemble the frame. It includes every screw, nut, and thread-forming fastener for a complete NightWing build.
Can I use this frame kit to build a complete NightWing?
Yes — this is the same frame used in the full FingerTech NightWing kit. You'll need to source the drivetrain, weapon system, electronics, and battery separately. All NightWing components are available individually on the ItGresa site.
Is any cutting or drilling required?
No. Every panel arrives CNC-machined with all pilot holes pre-drilled. Assembly is straightforward — no finishing work required.
Why is the bottom plate made from G10 Garolite instead of UHMW?
G10 Garolite is a glass-epoxy laminate that offers excellent rigidity and impact resistance — important for the bottom panel of an undercutter, which takes the most punishment in a fight. UHMW is used for the side panels and motor mounts where abrasion resistance and toughness matter more than stiffness.
Where can I find build instructions for the NightWing?
FingerTech publishes official build instructions for the NightWing kit. You can download the NightWing Kit Instructions PDF directly from the FingerTech Robotics website.
