FingerTech NightWing Screw Pack
FingerTech NightWing Screw Pack
The FingerTech NightWing screw pack is everything you need to assemble the NightWing 3lb undercutter frame — no hardware store trip, no guesswork. Designed specifically for the NightWing chassis, every fastener is sized and specified for the job. Button head thread-forming screws drive straight into the pre-drilled UHMW, PLA+, PETG, and G10 frame parts, and included heatshrink handles wiring cleanup. Grab your NightWing kit and build with confidence!
$9.99
Available on backorder
Everything That Holds NightWing Together
The FingerTech NightWing screw pack is the dedicated fastener kit for the NightWing frame kit — sold separately because not every builder needs a fresh set, but indispensable when you do. Every screw, nut, and bit of heatshrink in the pack is spec’d specifically for the NightWing chassis. Nothing generic, nothing to source on your own.
What’s Included
The pack covers two fastener jobs. The 49 button head thread-forming #6×1/2in screws handle the bulk of frame assembly — they drive directly into the pre-drilled UHMW, PLA+, PETG, and G10 frame parts with no tapping required. The 4 longer #6×1in button head screws are for deeper structural connections. Two M2×16mm flat head Phillips screws and matching nuts mount the power switch. A 6cm length each of 5mm OD and 7mm OD heatshrink rounds out the pack for clean wiring runs.
Tool You’ll Need
A cordless drill with a #2 Phillips bit is the right tool for the thread-forming screws. Set the clutch as light as it will go — these screws don’t need to be cranked tight, and the pre-drilled pilot holes do the work. Over-driving is the only real way to make a mess of the assembly, so let the drill do its job gently.
Spares Are a Good Idea
Thread-forming screws are a one-way street — once driven, they’ve cut their thread. If you strip one or lose one mid-build, you’ll want a spare on hand. FingerTech notes it’s not a bad idea to order an extra pack, and we agree. The cost is low and the alternative is a build stalled waiting on a single fastener.
Part of the NightWing System
The NightWing screw pack is a companion to the NightWing frame kit. If you’re building from the NightWing 3lb undercutter kit, the screw pack is already included — this listing is for replacement sets and builders sourcing parts individually.
Features
- Complete FingerTech NightWing screw pack — nothing to source separately
- 49 thread-forming #6×1/2in screws drive directly into pre-drilled frame parts
- 4 longer #6×1in screws included for deeper structural connections
- M2×16mm hardware included for Mini Power Switch mounting
- 5mm and 7mm OD heatshrink included for clean wiring runs
- No tapping required — thread-forming design cuts its own path
Specifications
| Property | Detail |
|---|---|
| Compatibility | FingerTech NightWing Frame Kit |
| Chassis Screws (short) | 49× Button Head Thread-Forming #6×1/2in |
| Chassis Screws (long) | 4× Button Head Thread-Forming #6×1in |
| Switch Mounting Hardware | 2× M2×16mm Flat Head Phillips Screw + Nut |
| Heatshrink | 6cm × 5mm OD, 6cm × 7mm OD |
| Suggested Tool | Cordless drill, #2 Phillips bit or #2 Phillips scredriver |
Frequently Asked Questions
Is this screw pack included in the NightWing kit?
Yes — if you're building from the FingerTech NightWing 3lb Undercutter Kit, the screw pack is already included. This listing is for builders sourcing frame parts individually, or anyone who wants a spare set on hand before a competition.
What are thread-forming screws?
Thread-forming screws cut their own threads as they drive in — no pre-tapping required. The NightWing frame parts are pre-drilled with pilot holes sized for these screws, so assembly is straightforward. The catch is that once driven, the thread is set. If you strip a hole or damage a screw, you'll want a replacement rather than trying to re-use the same fastener in the same hole.
What tool do I need?
A cordless drill with a #2 Phillips bit makes assembly fast and consistent. Set the clutch as light as it will go — these screws don't need much torque, and over-driving is the main thing to avoid. A standard #2 Phillips screwdriver works too if you prefer manual control, especially for the final snug on delicate parts.
Why is heatshrink included in a screw pack?
The NightWing kit groups all small assembly consumables together for convenience. The two heatshrink lengths — 6cm of 5mm OD and 6cm of 7mm OD — are sized for the wiring runs in the NightWing chassis. It's a small detail that saves you a trip to the parts bin mid-build.
Should I order a spare pack?
FingerTech recommends it, and we agree. Thread-forming screws are inexpensive and the pack count is generous, but combat robots take damage and rebuilds happen. Having a spare pack on the shelf means you're never waiting on a single fastener between events. For more on building and maintaining your NightWing, see the NightWing 3lb Undercutter Kit page.
