Fingertech S3M Timing Pulley 26T from Ant Beater
$9.00
ItGresa is proud to offer Fingertech’s specialty Timing Pulleys and Belts are the perfect solution for transmitting power from motors to wheels or shafts.
This particular pulley is specially-made for use with the Fingertech 1lb beater bar. Use it to replace damaged ones, stock up on spares, or for your own creation!
It can be used with the 4mm wide timing belts, in whatever size you need. The raised sections dovetail perfectly into the 1lb Beater Bar Delrin Flange (requires 2).
While O-Rings and round belts will slip under tension, these timing belts and pulleys have teeth that ensure a positive lock. The two raised bosses lock into the holes in the delrin flange to create a unified assembly that will not slip.
$9.00
20 in stock (can be backordered)
Specifications
Fingertech’s specialty Timing Pulleys and Belts are the perfect solution for transmitting power from motors to wheels or shafts. While O-Rings and round belts will slip under tension, timing belts have teeth that ensure a positive lock to the pulleys. Our pulleys will hold up best under the rigors of combat. This pulley is a direct Fingertech replacement pulley for 1lb beater bar.
Use with our FingerTech Timing Belts, or any other 3mm pitch belt.
Mechanical Details:
- S3M pitch (3mm high-torque) pulley
- Bore: 6.6mm (0.26″), good for 6mm or 0.25in shaft.
- Usable belt width: 4.3mm (0.17in)
- Width: 11.3mm (0.446″)
- Outer diameter: 24.04mm (0.95in)
- Two 3.8mm (0.15″) mounting holes spaced 15.24mm (0.6″) for 6-32 screws
- Two prongs for interfacing with our custom Delrin Flange. Prong length: 4.76mm (0.19in). Prong spacing: 16mm (0.63in)
- Material: 6061 aluminum
- Weight: 4.7g (0.17oz)
Pulley Belt Calculator:
Try Fingertech’s Pulley-Belt Distance Calculator! Pick from our available pulley and belt sizes and it will tell you how far apart they will be, OR plug in your desired distance and it will tell you which belt to use!
Return to The ItGresa Robot Shop.