Flysky FS-i6 Transmitter 2.4Ghz 6 channel
The Flysky FS-i6 Transmitter is a go-to transmitter for RC plane and drone enthusiasts around the world because of its configurability and robust operation. It has an impressive list of features, it comes at a competitive price, and it’s popular with combat robotics builders. It is an excellent radio for robotics. Six channels lets you control all sorts of add-ons: weapons, lifters, and more. The Flysky FS-i6 Transmitter is a digital proportional radio control system that operates on the global ISM band of 2.4GHz frequency, making it suitable for usage across the globe. The use of standard 2.4 GHz and AFHDS protocol make it compatible with most combat robotics systems.
There is both a knob and switch for both Channels 5 and 6. This allows you to set a motor speed or servo position, then switch it on to that preset position. No crystals to buy, and no need to worry about other radios interfering with your robot.
The LCD display and programming buttons allow the user to set up the transmitter without requiring a laptop and a connection to the transmitter. The FLysky FS-i6 has a dramatic number of options and capabilities, all configurable through the LCD display.
Includes a free ItGresa Robotics lanyard for holding the transmitter!
Return to the Robot Shop.
10 in stock (can be backordered)
|RF Range:||2.408-2.475 GHz|
|RF power:||Less than 20 dBm|
|2.4G system:||AFHDS 2A and AFHDS|
|Low voltage warning:||Less than 4.2V|
|DSC port:||PS2; output: PPM|
|Antenna Length:||26mm x 2 (dual antenna)|
|Power:||6V 1.5AA x 4|
|Display mode:||Transflective STN positive type, 128*64 dot matrix VA73 x 39mm, white backlight|
|Size:||174 x 89 x 190mm|
An English version of the Flysky FS-i6 user manual can be found here:
This radio is legal for all RFL Robot Combat events! Upon loss of transmitter signal, the receiver outputs all hold in “off” state. Most new motor controllers (like our tinyESCs) interpret this as motor-off and therefore pass the failsafe requirements. Servos will hold their last position, so make sure that does not pose a hazard in some way.
This transmitter has three programmable mixes, endpoint adjustment, subtrims, servo reverse, dual rates, and throttle curves!
The FS-i6 uses an LCD display on the device for reprogramming channel variables and mixing.