Galaxy 450mAh 2S Lipoly Pack


Exactly what your bots need!  Our Galaxy Battery 450mAh 2S Lipoly (Lithium Polymer) is a very light weight cell.  All lipoly batteries hold a higher percentage of their capacity at the rated discharge rate than many competitive products on the market which means longer run times.
• These high-discharge Lipoly batteries have no problems with the large current requirements of combat robots.
• High quality silicone-insulated wire for high current applications.

Read about Lithium Polymer technology here.

Helpful hints about batteries and robots from Husarion here.

Return to our Robot Store!


4 in stock (can be backordered)

SKU: G-2S-450 Categories: ,


Battery 450mAh 2S Lipoly

Note:  Each cell has a nominal or resting voltage of 3.7v.  Therefore, a 2s battery has two cells in series or 2S.  This equals a nominal voltage of (3.7v x 2) = 7.4v.  A 3S battery would have three cells in series and a nominal voltage of (3.7v x 3) or 11.1v.

  • Configuration: 2S (7.4V)
  • High quality silicone-insulated wire for high current applications.
  • Mating connector: JST
  • Balance connector on every size for ensuring packs are at their best before an event!
  • Max charge rate: 2C (2x the pack mAh rating) – the B6 Pro Charger and 12V Power Supply are a great charging solution.

* Do not discharge Lipo batteries below 3.3V per cell (9.9V for a 3S pack).

Add 5mm to the length where the wires exit. Below are usable dimensions, not the slimmest or average size!

Capacity:  Maximum current discharge:
(Burst is for 15 seconds)
(W x L x H)
45C Cont (13.5A), 90C Burst (27A)
45C Cont (20.25A), 90C Burst (40.5A)
19 x 45 x 14mm
32 x 54 x 13mm
19 grams (0.67oz)
29 grams (1.02oz)

USA Customers:Shipping Note:       

– All packages will go USPS ground to be in compliance with Lithium battery regulations.

Share This