Galaxy 450mAh 3S Lipoly Pack
Exactly what your bots need! Our Galaxy Battery 450mAh 3S Lipoly (Lithium Polymer) is a very light weight cell. All lipoly batteries hold a higher percentage of their capacity at the rated discharge rate than many competitive products on the market which means longer run times.
• These high-discharge Battery 450mAh 3S Lipoly has no problem with the large current requirements of combat robots.
• High quality silicone-insulated wire for high current applications.
Helpful hints about batteries and robots from Husarion here.
Return to our Robot Store!
2 in stock (can be backordered)
– Configuration: 3S (11.1V)
– High quality silicone-insulated wire for high current applications.
– Mating connector: JST (XT60 for 850mAh and 1000mAh)
– Balance connector on every size for ensuring packs are at their best before an event!
– Max charge rate: 2C (2x the pack mAh rating) – the B6 Pro Charger and 12V Power Supply are a great charging solution.
* Do not discharge Lipo batteries below 3.3V per cell (9.9V for a 3S pack). We sell Lipo Low Voltage Alarms to give an audible warning when the pack reaches this limit.
Add 5mm to the length where the wires exit. Below are usable dimensions, not the slimmest or average size!
|Capacity:||Maximum current discharge:
(Burst is for 15 seconds)
(W x L x H)
|45C Cont (13.5A), 90C Burst (27A)
45C Cont (20.3A), 90C Burst (40.5A)
45C Cont (45.0A), 90C Burst (90.0A)
|18 x 45 x 20mm
32 x 53 x 15mm
35 x 68 x 18mm
|26 grams (0.95oz)
40 grams (1.41oz)
79 grams (2.79oz)
– All packages will go USPS ground to be in compliance with Lithium battery regulations.