GS-5515MG Analog Servo CW 15kg (Clockwise rotation)
$13.99
These GS-5515MG Analog Servos are the strongest we could find for their price.
These are the same model servos used in the Fingertech lifter kit.
- Standard-sized servo.
- Metal gears for super high torque.
- 18kg-cm (250oz-in) @ 9V.
- Clockwise rotation with positive pulse – If you need this servo to turn the opposite direction, simply reverse your transmitter channel or purchase the FH-5515MG.
- These are NOT the servos used in Viper Lifter Add-On. Use the FH-5515 if you need a replacement or simply reverse the polarity.
- Input: 4.8V – 10.0Vmax
If your robot’s battery is higher than 9V, simply run the servo power from a 9V regulator.
$13.99
3 in stock (can be backordered)
Specifications
GS-5515MG Analog Servo CW
Use 9v voltage regulator for batteries that are higher than 9V (3S batteries, for example). See the 9V regulator and wiring diagram for a Viper HERE.
| Parameter: | Spec: |
|---|---|
| Type: | Analog, 60° (±10°) of rotation, can be modified for continuous rotation |
| Direction: | Clockwise is Pulse Travel 1500 to 1900 usec (so stick “Up” is clockwise) – If you need this servo to turn the opposite direction, simply reverse your transmitter channel |
| Dimensions: | 40mm x 40mm x 20mm (1.57″ x 1.57″ x 0.79″) |
| Weight: | 62g (2.19oz) |
| Construction: | All metal gears, double ball bearing |
See the below table for details of the GS-5515MG Analog Servo performance at different voltage values.
| Operating Voltage | 4.8V | 6.0V | 7.4V | 9.0V |
|---|---|---|---|---|
| Speed: | 0.31sec/60° | 0.28sec/60° | 0.24sec/60° | 0.20sec/60° |
| Stall torque: | 13kg-cm | 15kg-cm | 18kg-cm | 20kg-cm |
| Stall (oz-in): | (139oz-in) | (173oz-in) | (214oz-in) | (250oz-in) |
| Idle Current: | 250mA | 300mA | 350mA | 450mA |
| Avg Current: | 0.65A | 0.8A | 1.0A | 1.2A |
| Stall Current: | 1.6A | 1.8A | 2.2A | 2.6A |
