Just Cuz Switch Power Distribution Board v1.3

$7.50

The Just Cuz Switch Power Distribution Board v1.3 is a simple, compact, lightweight, low-cost option for simplified wiring in combat bots and more! This board is the perfect marriage of the All-In-One PD Board and the Basic PD Board. It combines the PCB Switch that can handle as much current as an XT30 connector can take, and the power distribution from a battery to up to three ESCs or other devices.

Now there is no need for a messy wire ‘squid’ to wire all your ESCs and other devices! Your bot’s wiring is clean and lean, organized, and easy to troubleshoot and modify.

See the Just ‘Cuz excellent video on this product here:

15 in stock (can be backordered)

SKU: jc-pd-switch-board Categories: , ,

Specifications

Switch Power Distribution Board

Parameter Spec
Length 14mm, 0.56″
Width 48mm, 1.89″
Thickness 1.6mm, 0.065″
Weight 7.5g, (0.27oz) ea.

Included as part of the assembly:

  • Qty 1 Power Distribution/switch board
  • Qty 1 Tin plated steel #8-32 press insert nut, pressed into the power switch hole
  • Qty 1 #8-32 Button Head Screw for the power switch

Switch Power Distribution Board Features:

  • 3/32″ hex drive. 3/32″ matches Fingertech mini switches, no need to have two different tools to turn on different bots.
  • Convenient, electrically isolated mounting screw holes to hold down the board or attach a cover.
  • Clearance for M3, #6-32, or #6 plastite screws!
  • Convenient mounting points for up to four XT30 or XT30U connectors! Battery, Weapon, and two drive sides or other devices.
  • Clearly marked orientation for connectors to avoid reverse polarity ruining your parts.
  • Use any connector or combination of direct soldering and connectors.
  • Built-in screw switch to disconnect battery voltage from all devices (tested at 32A for 3.5 minutes, 50A+ for 30 seconds).
  • When the screw is tightened, this connects battery positive to all other connector positive terminals.
  • Can connect as many other devices as you wish to the copper pads under the board – no need to use just four!
  • Clear labels for all components and pins for easy assembly and troubleshooting.
  • Extra pads on top to connect a BEC or other auxiliary devices.
  • Massive copper pads on both sides for increased current-carrying and heat dissipation.

You may also like…

SHARE YOUR CART