T6A Transmitter 2.4GHZ 6 Channel
This simple 2.4GHz Transmitter is an excellent radio for robotics. Six channels lets you control all sorts of add-ons: weapons, lifters, and more.
There is both a knob and switch for both Channels 5 and 6. This allows you to set a motor speed or servo position, then switch it on to that preset position. No crystals to buy, and no need to worry about other radios interfering with your robot. One stick has spring return on both axes, the other has a ratchet for the up/down axis.
The T6A transmitter requires a T6RA V2 receiver (V1’s will not work, and of course we don’t sell them. If you have an older receiver that you want to use, please keep this in mind.) The receiver is not bundled with the transmitter. If you don’t already have a receiver that is compatible, we suggest that you purchase the T6RA-V2 receiver along with the transmitter. If you do, we will ensure the receiver is bound to that particular transmitter, so you won’t need to do that.
We also recommend the programming cable.
This is the same transmitter as the HobbyKing HK-T6A, and it works with HK-T6RA V2 receivers.
Includes a free FingerTech or ItGresa Robotics lanyard for holding the transmitter!
Return to the Robot Shop.
Available on backorder
The simple 6-Channel 2.4GHz Transmitter has a knob and switch for both Channels 5 and 6. This allows you to set a motor speed or servo position, then switch it on to that preset position.
The right stick has spring return on both axes, the left stick has a ratchet for the up/down axis. If you prefer both axes to be spring-return, we have developed a custom Spring-Return Kit for these transmitters.
This radio is legal for all RFL Robot Combat events! Upon loss of transmitter signal, the receiver outputs all hold in “off” state. Most new motor controllers (like our tinyESCs) interpret this as motor-off and therefore pass the failsafe requirements. Servos will hold their last position, so make sure that does not pose a hazard in some way.
This transmitter has three programmable mixes, endpoint adjustment, subtrims, servo reverse, dual rates, and throttle curves!
Comes with Mixing on Channel 1 & 2 for single-stick robot drive applications. You will need a PC Cable for reprogramming channel variables and mixing.