T6A Transmitter 2.4GHZ 6 Channel Bundle
Also known as CT6B and FS-CT6B, this simple 6-Channel 2.4GHz Transmitter is an excellent radio for robotics. Six channels let you control all sorts of add-ons: weapons, lifters, and more.
There is both a knob and switch for both Channels 5 and 6. This allows you to set a motor speed or servo position, then switch it on to that preset position. No crystals to buy, and no need to worry about other radios interfering with your robot. One stick has spring return on both axes, the other has a ratchet for the up/down axis.
To make the bot run, and give you the ability to alter the base program in the transmitter, you need both a receiver to accept the signals and translate them to motor motion, and a programming cable to be able to alter and download new programs to the transmitter. This bundle includes both, plus an ItGresa lanyard, a total value of $78.47
This bundle includes:
This is the same transmitter as the HobbyKing HK-T6A, and it works with HK-T6RA V2 receivers, or the Flysky FS-TR6B transmitter.
Return to the Robot Shop.
Available on backorder
Also known as CT6B and FS-CT6B, this simple 6-Channel 2.4GHz Transmitter has a knob and switch for both Channels 5 and 6. This allows you to set a motor speed or servo position, then switch it on to that preset position.
The right stick has spring return on both axes, the left stick has a ratchet for the up/down axis. If you prefer both axes to be spring-return, we have developed a custom Spring-Return Kit for these transmitters. (Spring return is not included in this bundle and must be ordered separately).
This radio is legal for all RFL Robot Combat events! Upon loss of transmitter signal, the receiver outputs all hold in “off” state. Most new motor controllers (like our tinyESCs) interpret this as motor-off and therefore pass the failsafe requirements. Servos will hold their last position, so make sure that does not pose a hazard in some way.
This transmitter has three programmable mixes, endpoint adjustment, subtrims, servo reverse, dual rates, and throttle curves!
Comes with Mixing on Channel 1 & 2 for single-stick robot drive applications. We include a PC Cable for reprogramming channel variables and mixing.
This bundle includes everything you need:
- A programming cable, for configuring the transmitter, should you want to change the program configuration.
- The T6A transmitter itself. The transmitter comes ready to go with a combat robotics program already installed.
- The TR6A-V2 receiver, already bound to the transmitter.