USB cable A to Micro-B for Arduino


This USB cable A to Micro B is 6 ft (1.8 m) long and is terminated on one end by a Type-A USB plug and on the other by a Micro-B USB plug. It works with high-speed USB devices.


4 in stock (can be backordered)

SKU: po-usb-a-to-micro-b-6ft Category:


USB cable A to Micro B

Maximum output current: 1A
Voltage: 9 V

From the Arduino site:

Some Arduino boards like UNO, MEGA and DUE, come with an AC socket that can be used to power the boards and to supply additional voltage if needed. A power supply adapter that provides from 7 to 12V (Volts) of DC (Direct Current) is required. The adapter is plugged onto the wall socket and the other end goes directly onto the board’s AC socket…

The AC adapters are commonly available in retail stores for use with consumer products are often suitable, but make sure that it has the proper connector for plugging into the power socket on your Arduino board: 5.5mm diameter cylindrical plug with 2.1mm pin hole, and that provides Positive voltage on the inside pin hole and Negative (or common/ground) voltage on the outside cylindrical sleeve of the connector plug…”