Fingertech Viper Tail Spinner Kit
$79.99
Got a Viper Combat Robot and want to make it more destructive and more effective? Look no further! Add a ferocious horizontal tail-spinner weapon to your Viper! Absorb the opponent’s attack with your front armor then whip the tail around to impact their side!
Many robots have a vertical spinner, horizontal spinner, or a lifter. Not many have a tail spinner! Be unique with your weapon, get the Fingertech Viper Tail Spinner!
- The prototype for the Fingertech Viper Tail Spinner won 1st Place at its first event with no upgrades!
- Mounts on the existing Viper Combat Robot.
- No soldering required.
Combat robots are inherently dangerous when weaponized. Only test and use your combat bot with safety protection in an enclosed stadium. Buyer assumes all responsibility.We strongly suggest a weapon clamp with your vertical spinner kit. Find one here.
$79.99
11 in stock (can be backordered)
Product Documents
Instructions
Specifications
Included in your kit:
Component |
Description |
|---|---|
UHMW Tail Arm |
A custom machined 1/4in thick UHMW Tail Arm with twelve mounting holes to attach everything. |
UHMW Motor Guard |
1/8in thick UHMW Motor Guard with mounting holes and slots, to bend around the weapon motor. |
Weapon Motor |
2822-1100KV Brushless Motor (4mm shaft) + Screws |
Weapon Controller |
20A Brushless Speed Controller |
Angled Motor Mount |
The Angled F2822 Motor Mount fastens the motor solidly and aligns the blade with the floor. |
Blade Mount |
FingerTech Blade Mount fastens directly to the motor body for maximum strength. |
Blade |
A 3.5in Asymetric Titanium Blade is sharp and light and can be whipped around extremely fast! |
Armor |
New UHMW Front Armor to absorb the opponent’s attack, leaving them open to side swipes. |
Fasteners |
All the screws (4pcs 6-32 x 1/4in, 4pcs 6-32 x 1/2in, 3pcs 4-40 x 1/2in, 4pcs 4-40 x 3/8in Screws) and a 1/16in Hex Wrench |
Kit Weight |
138grams (4.84oz) with UHMW front armor. |
Total Viper Weight with Kit |
433g (15.27oz) with a 300mAh 2S lipoly, or 440g (15.52oz) with a 300mAh 3S lipoly. (9V battery not recommended to power this Add-On. |
Voltage |
7.4V – 11.1V. The 7.4V 300mAh 3s battery, used in the Viper works great- any 3S lipoly will give your weapon extra oomph! |
Instructions |
Detailed instructions with pictures: Viper-T-Spinner-add-on-R1.pdf |
Notes:
- A 9V battery is not recommended to power this Add-On.
- If you want to swap to a different Weapon Blade, the FingerTech Blade Mount fits all of our custom blades and the Tail Spinner can fit anything up to 10inch diameter (but check your weight!)
Requires:
- Phillips screwdriver #2
- Threadlock liquid
- Electrical tape, zipties, or cable-ties
- Weapon safety lock
You may also like…
-
Design your own Fingertech Viper V3 Kit
$166.99 Select options This product has multiple variants. The options may be chosen on the product page -
D2822/17 Brushless Motor Outrunner 1100KV – 4mm
$17.99 Add to cart -
Angled F2822 Motor Mount
$9.49 Add to cart -
FingerTech 2.75in Asymmetrical Titanium Blade
$18.99 Add to cart -
Fingertech Blade Mount
$6.99 Add to cart
