XT30 connector – male-female pair

$2.59

If you’ve connected a lipoly battery in your robot or other device and you’re using a beetleweight setup, you may be using a two pin xt30 connector on your battery.  Ours are high quality, high strand count silicon wire.  This gives a higher amp throughput vs the standard wire of the same diameter. Connectors are gold plated for higher current handling and reduced intermittency due to oxidation. Great for a power disconnect, or as a general connector. Female two pin XT30 connectors are now offered on some Galaxy Lipoly battery packs.

Back to shopping page: https://itgresa.com/robot-shop/

$2.59

40 in stock (can be backordered)

SKU: xt30-male-female-wires Categories: , , , Tag:

Product Documents

Specifications

XT30 connector Male-Female Pair with Wires

XT30 connector male with wires

  • 10cm 18 AWG Soft Silicone Wire Cable
  • XT30 Male Connector
  • Weight: 4g, 0.1oz
  • Wire Length: 100mm, 3.95″
  • Strip length: 3.9mm, 0.15″
  • Total Length: 110.9mm, 4.37″
  • Width: 10.2mm, 0.4″
  • Thickness: 5.4mm, 0.20mm
  • Current: Connector Rated 30A continuous, 65A peak. 18AWG wire rated 16A continuous in free air
  • Connector Housing Dimensions: 13mm x 10.2mm x 5.4mm.  
  • Plug connector color: yellow; Cable wire color: red and black
  • Suitable for combat robotics and also for most mini RC models, and LED strip lights.  Also used for connecting motors, Electronics Speed Controllers, and batteries.
  • Used to connect to our Just ‘Cuz Power distribution units.

XT30 connector female with wires

  • 10cm 18 AWG Soft Silicone Wire Cable
  • XT30 Male Connector
  • Weight: 3g, 0.1oz
  • Wire Length: 100mm, 3.95″
  • Strip length: 3.9mm, 0.15″
  • Total Length: 110.9mm, 4.37″
  • Width: 5.2mm, 0.2″
  • Thickness: 5.4mm, 0.20mm
  • Current: Connector Rated 30A continuous, 65A peak. 18AWG wire rated 16A continuous in free air
  • Connector Housing Dimensions: 13mm x 10.2mm x 5.4mm.  
  • Plug connector color: yellow; Cable wire color: red and black
  • Suitable for combat robotics and also for most mini RC models, and LED strip lights.  Also used for connecting motors, Electronics Speed Controllers, and batteries.
  • Used to connect to our Just ‘Cuz Power distribution units.

To use our Just ‘Cuz power distribution units effectively, you’ll need some of these and some bare connectors to plug into the board and continue the wiring in the bot.

SHARE YOUR CART